HOME > 제품소개 > Solar Cell Simulator > Photovoltaic 측정
QuickSun 130E
Cell Solar Simulator
 
제조사 Endeas Oy
원산지 핀란드
     
 
QuickSun 130E exceeds the ordinary Class A criterions of IEC904-9 ed. 2
with clear margin providing enhanced IV characteristics accuracy.
The applicable test methods and procedures are inspected by SGS Fimko Ltd
in order to guarantee the compliance and traceability not only with the above standard
but also with IEC904-1 ed. 2 which specifies the IV measurement conditions.


IV measurement characteristics
Contacting 4-wire / Kelvin  
Load feedback controlled MOSFET adjustable bias 0 – 4.5 V
Voltage sweep linear and double slope alternatives Isc -> Voc, Voc -> Isc; average of both
Voltage measurement 1 – 4 V (other scales on request) accuracy 0.2 % / 512 samples
Current measurement 0.5 – 25 A (other scales on request) accuracy 0.2 % / 512 samples
Irradiance control 200 – 1200 W/m² accuracy 1 ºC
Module temperature (IR) 0 – 75 ºC accuracy 1 ºC
Monitor cell temperature 0 – 75 ºC  
Pmp repeatability < 0.1% (1σ/ave)  
Average flash tube life time 300 000 flashes  
Operation temperature 15 – 35 ºC  
Mains utilities 1~, 110 / 230 Vac, 20 / 10 A, 50-60 Hz  
 
 
 
 
 
07072 서울시 동작구 신대방1가길 38 (신대방 719번지 동작상떼빌) 106동 209호 (주)원우시스템즈
TEL : 02-533-6720, 02-3289-1290  FAX : 02-3289-1293
Santevill 106-209, 38, Shindaebang1ga-gil, Dongjak, Seoul, 07072, South Korea
Copyright 2000-2017 Wonwoo Systems Co.,Ltd. All right reserved